We are pleased to announce the Suhr SL68™ Hand Wired
Amp, now includes a Master Volume control (located on the back panel).
Each SL68 amp features hand wired construction, four
EL-34's (which deliver 100 watts), four inputs, two channels, a Low Power
switch, a Master Volume control, and delivers a wide range of classic and
From warm and sparkling cleans, to high-gain *Variac™
style overdrive tones, the SL68 is the foundation of great rock tones!
POWER SELECT SWITCH
Offers the following three-positions:
power mains are switched off
the SL-68's feel from tight and aggressive to spongy with a smoother attack,
excellent for solo playing.
The Presence control adjusts the amount of high
frequencies added to your sound, turning it clockwise will add more cut and
sparkle to your tone.
The Bass control adjusts the low end, turning it
clockwise increases the amount of low frequencies in your tone.
The Middle control adjusts the midrange, turning it
clockwise increases the mids, making it fatter. Turning it counterclockwise
will reduce the mids and produce a scooped type of sound.
The Treble control adjusts the top end. Turning it
clockwise increases the amount of brightness or treble frequencies in your
Adjusts the overall output level of Channel I.
Adjusts the overall output level of Channel II.
CHANNEL I INPUT (top)
Has a high
sensitivity and voiced brighter than Channel II.
CHANNEL I INPUT (bottom)
Has low sensitivity and
offers a slightly warmer tone.
CHANNEL II INPUT (top)
Has high sensitivity and
offers a normal/bassier tonal response.
CHANNEL II INPUT (bottom)
sensitivity and a normal/bassier tonal response.
BRIDGING OR JUMPING THE CHANNELS
Bridging or Jumping the channels will unlock a palette
of sounds and expand the SL-68's possibilities. Begin by plugging your guitar
into the top (high sensitivity) input of Channel I, then run a short instrument
patch cable from Channel I's bottom (low sensitivity) input to the top (high
sensitivity) input of Channel II, then blend Volume I and Volume II controls to
dial in a wealth of new and unique tones.
Adjusts the SL-68‘s overall output level and offers
the flexibility to dial up rich, high-gain overdrive at any volume.
Two loudspeaker outputs wired in parallel with 3-way
impedance selector switch for 4Ω, 8Ω & 16Ω.
Output: 100 Watts RMS
Front Panel: Power
Select Switch, Presence, Bass, Middle, Treble, Volume I, Volume II controls and
Back Panel: Master
Volume, 2-Speaker outputs, Impendance selector (4Ω, 8Ω, & 16Ω), HT Fuse,
Mains Inlet and Mains Fuse