3rd Power Amplification

Founded in 2009, 3RD POWER's mission is to create and deliver extraordinary guitar tone. Our line of innovative products immerse guitarists in the ultimate "High Definition musical experience" - on stage and in the studio - at virtually any volume.




  Mouseover to zoom or click to enlarge

3rd Power Dirty Sink 6 VEL Combo
Description

THE ULTIMATE BRITISH CRUNCH GUITAR AMP SYSTEM

The DIRTY SINK 6VEL is our new British-Crunch voiced amplifier based on the dirty channel of our flagship, Kitchen Sink 6VEL amplifier and features point-to-point turret board construction.  Loaded with M6-Grade Steel transformers and an overbuilt power supply delivering 35+ watts of power available in a 32 lb. 112 grab-n-go combo or 22 lb. compact amp head.

 

Features include a selectable Plexi/Cascade voiced British preamp, Dual Mode 3-band cathode-follower EQ (JTM/JMP), 4-way Preamp Bias Selector, Foot-switchable preamp gain boost, Foot-switchable tube buffered effects loop, Foot-switchable lead boost, our patented Hybrid-Master, external bias test terminals with back panel adjustment control, Switchable internal cooling fan, AND the ability to run 6L6, EL34, 5881 and 6V6 and more – hand-wired in the USA and covered by a LIFETIME WARRANTY.

 

HOW IT WORKS

The DIRTY SINK 6VEL features a tone stack voicing switch that delivers the sweeter JTM tone control voicing and balanced gain response in one position, and the more in your face JMP voicing in the other. The Plexi/Cascade switch lets you select the amount of signal gain on tap to and assigns it to the Gain control knob. Plexi Mode is where you’ll find Crisp British clean to crunch. Cascade Mode is where you’ll find scorching high gain tones. The Gain Boost switch engages even more gain sending the tone stack driver stage into clipping without compromising the overall headroom of the tone. See below for a description of each of the three individual amp voices.

 

PLEXI/CASCADE

Set to Plexi Mode, you’ll find classic British clean to crunch tones. Set to Cascade Mode, you’ll find tones ranging from soaring solos to modern saturation.

+GAIN

Back in the day, players yearned for even more gain from their British lead style amplifiers and dreamed that this feature could be placed under foot switch control. We’ve added that here and we think it’s going to make a lot of people happy!

 

'65 JTM

The JTM45 debuted in ’65 bringing the punch and sustain of a certain American style bass amp but with a decidedly British angst. One circuit common to both was the tone stack featuring a 56k ohm slope resistor and a 250pf treble capacitor. This made for a sweeter tone with emphasis on the melody strings.

 

'68 JMP

The JMP amplifiers debuted around late ’67 bringing with it a distinctive mid-range frequency slice, increased sustain and of course, more power. One design tweak made a huge impact: a 33k ohm slope resistor and a 470pf treble capacitor. This increased overall gain, slice and punch… mission accomplished.

 

Features Overview:

• British Voiced Plexi & Cascaded Preamp Section (switchable)

• Dual-mode 3-Band EQ (JTM/JMP – switchable)

• Tube Buffered FX Loop (foot-switchable)

• Preamp Gain Boost (foot-switchable)

• Preamp Bias Selector (4 position switch from cold to warm)

• HybridMaster plus foot-switchable lead boost

• 6V6 (~20W) or 5881/EL34/6L6 (~35W and up) Operation

• Back-panel Bias Test Points and Adjustment Pot

• Over-sized /Overbuilt Power Transformer and Power Supply

• 4 Button Pro Foot Switch & 7 Pin Cable (included)

• Hand-wired and Hand Built in Nashville, TN

• Limited Lifetime Warranty

 

 

Model Name: Dirty Sink 6VEL

Output Architecture: 2x Power Tubes (Class AB), Fixed Bias

Power Output: 35W (EL34,6L6), 20W (6V6)

Plate Voltage: 120V AC input yields ~440 V DC plate voltage

Controls: Plexi/Cascade Sw, Gain, +Gain Sw, Volume, Treble, Middle, JTM/JMP Sw, Bass, Presence, HybridMaster, HM Bypass

Output Impedance: Impedance Selector (16, 8, 4 Ohms) feeds two Output Jacks

Internal Speaker (Combo): WGS Retro 30 12″ Speaker (8 Ohms)

Preamp Architecture: 3x JJ ECC83S, 1x Sovtek 12AX7LPS

Materials and Dimensions: 3/4 in. Solid Pine Cabinetry, Birch Front Baffle.

112 Combo: 19-7/8 in. x 16 in. x 9.5 in

Head: 19-7/8 in. x 8.5 in. x 9 in

Weight: Head: 22 lbs. 112 Combo: 33 lbs.

Certification: CE Certified

 

Dirty Sink 6VEL ships as follows:
• Dirty Sink 6VEL 112 Combo
• Loaded with 2x JJE34L Power Tubes
• WGS Retro 30 8-ohm 12
 Speaker
• Tolex color is Black Levant with vertical Bluesbreaker as standard.
• Control Faceplates are Black as standard

Introductory Pricing: Now through May 21, 2023
$3199 USD (Head Version) – (regular price: $3499)
$3499 USD (112 Combo Version) – (regular price: $3799)




Price: $3,499.00

Qty 

 


Copyright 2024 The Amp House. All Rights Reserved.

Web Design Tulsa | Sitemap